Are you searching for an article that covers a comprehensive guide on how to connect an outdoor wifi antenna to the router?
If yes, you’re welcome, because here we’re going to share one of the most helpful step-by-step guides on the internet on this particular topic.
An outdoor wifi antenna is a wifi bridge device or wifi access point which uses a standard Ethernet cable, you can use it to run back your primary router and network connection to its built-in Ethernet port.
But even if you like the definition, you must follow a guide to complete the task, no worry, follow the below section:
How You Can Connect an Outdoor Wifi Antenna To Your Main Router?
Note: The tasks you’re going to complete will require some standard tools and some supplies from any hardware shop, so before following the guide make sure you have all the required tools and devices.
Step #1: The first step you will need to take is to disconnect the router from all external connections. It’s for your safety, so make sure there is no electric power source connected to the router.
Step #2: You’ll require an antenna rated that compatible with your weather, you should also make sure that it matches the frequency of the router’s wifi you’re using.
Step #3: Without mixing indoor and outdoor antennas, you’ll need to use a uniform antenna, for instance, if the router contains three antennas, find an antenna only for outdoor.
Step #4: Matching your antennas, purchase a well-quality coax cable with plugs, you can pick N-type plugs, but always read your router configuration before buying them.
Step #5: Try to keep the coax cables as compact as possible during your setup. keep the plug adaptor with coax cable as they are, and don’t try to tight them hardly, because there might be a chance of damage.
Step #5: For safety reasons, you can wrap all your outdoor connectors with tape, but only do it once you’re done.
Step #6: If the weather is bad and it starts raining, you need to put a U-shaped container under the antenna where the rainwater will collect.
Well, You have proper knowledge of how to connect an outdoor wifi antenna to a router after reading the above guide, now we’re going to share with you something you might need to know about a router antenna.
Type of Antenna
in this modern innovation and based on the radiation model, there are three types of antennas available in the market, Omni Directional Antenna, Semi Directional Antenna, and DIrectional Antenna.
Here the Omnidirectional antenna plays the most useful role in providing electromagnetic waves equally in all directions.
Semi-directional send radio waves in a specific area and pattern and directional antennas send power in a particular area only.
Type of WiFi Antenna
When it comes to WiFi antennas we can see there are two types of wifi antennas out there based on their placement, indoor and outdoor.
The indoor antenna doesn’t have enough ability to handle a high-speed wifi network, on the other hand, an outdoor wifi antenna can handle the highest speed of wifi line based on the condition.
Indoor antenna size is compact and small and used in any specific room or a small house, on the other hand, a size of an outdoor wifi antenna might be big according to your needs.
All the outdoor antennas are created to cover a large area and these are commonly mounted on the rooftop and can send or receive radio waves to quite long distances. All the outdoor antennas are waterproof.
Summing-Up:
Connecting an outdoor wifi antenna to your existing router would be a great job for increasing your network coverage more longer with a little cost.
This way is also helpful for a large family, But in addition to doing this, you need to increase the speed of your network so that this will work perfectly for every device connected on the same network.
So we hope you’ve got the right solution from the post about how to connect an outdoor wifi antenna to the router.
If you’re still confused, just let us know by commenting below,