Skip to content
ShoukhinTech
  • Home
  • AppSumoDeal
  • Reviews
    • Networking
    • Laptop
  • Blog
  • Write for Us

Why Is My iPad Stuck In A Boot Loop? Fixes!

by shoukhin

If your iPad is stuck in a boot loop, it usually means the software is encountering a critical error during startup. The most common fixes involve forcing the iPad to restart, restoring it using a computer via Recovery or DFU Mode, or checking for recent app/update issues. Follow the steps below for a stress-free resolution.

Seeing the Apple logo appear, disappear, and then reappear endlessly is frustrating. If your iPad is stuck in a boot loop, don’t panic! This frustrating situation almost always points to a software hiccup, not permanent hardware damage. You are not alone in facing this.

The good news is that many of these issues can be fixed right from home using simple steps. We will walk through the process gently, starting with the easiest solutions first. Think of this as a friendly guide to waking up your trusty iPad.

Ready to get your iPad back to normal? Let’s dive into understanding what causes this loop and how we can break out of it together.

What Exactly Is an iPad Boot Loop?

An iPad boot loop (or restart loop) is precisely what it sounds like: your device keeps trying to start up, shows the Apple logo, shuts down again, and repeats the process without ever reaching the Home Screen. It gets stuck in a cycle.

Generate a high-quality, relevant image prompt for an article about: Why Is My iPad Stuck In A Boot

Why Does This Loop Happen to My iPad?

Understanding the “why” helps us apply the right fix. Most boot loops are triggered when the operating system (iPadOS) fails to load correctly. This usually stems from a few common sources. We can generally group the causes into three main buckets.

1. Software Glitches and Updates

The most frequent culprit is a recent software event. Maybe an iOS update didn’t install perfectly, or a newly installed app is conflicting with the system at startup. If the operating system files become corrupted, the iPad can’t complete the boot sequence.

2. Low or Damaged Storage

If your iPad storage is completely full right before the loop started, the system might not have the required space to finalize startup processes. Less common, but still possible, is corruption on the internal storage chips themselves.

3. Hardware Interference

While less common for a pure boot loop, sometimes severe battery issues or damage from a drop can cause the internal components to send bad signals during startup, leading to the loop. We will address this after ruling out software issues.

Step 1: The Gentle Nudge – Forced Restart

Before we try anything drastic, we need to perform a “forced restart.” This is different from a normal restart because it cuts the power completely, clearing temporary memory errors without erasing any data. This fixes the vast majority of minor boot loops.

Generate a high-quality, relevant image prompt for an article about: Why Is My iPad Stuck In A Boot

How to Force Restart an iPad (The Proper Way)

The method for forcing a restart depends entirely on which iPad model you have. Because the Home Button models use one sequence and newer models (without a Home Button) use another, you must follow the correct one for your device.

For iPads Without a Home Button (Face ID Models: iPad Pro, newer Air/Mini):

  1. Press and quickly release the Volume Up button. You need to be quick here.
  2. Press and quickly release the Volume Down button. Again, do this right after the first press.
  3. Press and hold the Top Button (Power Button) on the side or top edge. Keep holding.
  4. Continue holding the Top Button even after the Apple logo appears. Only release it when you see the standard startup screen or the device finally boots up fully after a minute or two.

For iPads With a Home Button (Older iPads, standard models):

  1. Press and hold the Home Button AND the Top Button (Power Button) at the exact same time.
  2. Keep holding both buttons down simultaneously.
  3. Continue holding them past the point where the screen goes black and the Apple logo appears. Release both buttons only once the iPad successfully restarts or shows the Apple logo for a third time without shutting down.

If the forced restart gets your iPad past the loop and onto the Home Screen, celebrate! You are done. If it still gets stuck, move immediately to Step 2.

Step 2: Check for Recently Added Software or Tweaks

If Step 1 didn’t work, it’s highly likely that the problem started immediately after you did something specific. Think back about an hour or two before the loop began. Did you install a new app? Did you install a major software update?

When a Recent Update is Suspect

If the loop started right after an iPadOS update, the system files might be corrupted. In this case, attempting the update again via Recovery Mode (Step 3) is the only way forward, as the operating system needs to be completely reloaded.

Dealing with Problematic Apps

If you installed a third-party app right before the issue, that app might be incompatible or buggy. Since you can’t get to the Home Screen to delete it, we must try to boot into Safe Mode—though Apple doesn’t officially call it that for the iPad.

Simulating Safe Mode Startup

While iPads don’t have a true “Safe Mode” like Macs, booting from a specific state can sometimes bypass problematic third-party launch items. Unfortunately, for a continuous boot loop, the only way to guarantee bypassing all third-party software is to enter Recovery Mode.

Boot Loop Diagnosis Checklist
Symptom Detail Likely Cause Next Recommended Step
Loop starts immediately after an iPadOS update. Corrupted OS file during installation. Recovery Mode Restore (Step 3).
Loop starts after installing a specific new game or utility. App conflict on startup. Recovery Mode Restore (Step 3).
iPad shows the Apple logo briefly, then shuts off completely (no loop). Severe battery drain or hardware failure. Charge for 30 minutes, then retry Forced Restart.

Step 3: Enter Recovery Mode and Update/Restore

When a simple restart fails, the next crucial step is putting your iPad into “Recovery Mode.” This mode allows your computer (Mac or PC) to communicate directly with the low-level software on your iPad, bypassing the corrupted operating system that is causing the loop.

⚠️ Important Warning: Both options in Recovery Mode (Update and Restore) require erasing everything on your iPad if the Update fails. Be prepared that if you don’t have a recent backup, this step might result in data loss. However, if you cannot access the device, data recovery is impossible anyway.

What You Need First

  • A computer (Mac running macOS Catalina or later, or a PC with the latest iTunes installed).
  • A reliable USB cable to connect your iPad to the computer.

Putting the iPad into Recovery Mode

This sequence is crucial and must be done precisely while the iPad is connected to the computer. We use the exact same button combinations as the forced restart, but we hold them longer until a special screen appears.

Recovery Mode Sequence (Same as Forced Restart buttons):

  1. Connect your iPad to the computer.
  2. If you have a Home Button iPad: Press and hold the Home Button and Top Button simultaneously.
  3. If you have a newer, no-Home-Button iPad: Press and release Volume Up, press and release Volume Down, then press and hold the Top Button.
  4. Keep holding the required buttons. Do not release yet!
  5. Release the buttons only when you see the Recovery Mode screen. This screen shows a computer icon and a cable pointing toward a web browser or iTunes logo.

Once you see this screen, your computer should pop up a message immediately asking what you want to do. This is the gateway to fixing your boot loop!

Option A: Try Updating First (The Safest Choice)

If you select “Update,” your computer will try to reinstall the latest version of iPadOS without erasing your files. This is the least destructive option and should always be tried first.

  1. When your computer detects the iPad in Recovery Mode, you will see two choices: Update or Restore.
  2. Choose Update.
  3. The computer will download the necessary iPadOS software (this can take a while depending on your internet speed).
  4. The computer then attempts to reinstall the OS while keeping your data intact.

If the Update option is successful, your iPad will restart normally, and you should be back to your Home Screen! If the Update fails (often giving an error code like 4013—though we won’t get technical), you must move on to Option B.

Option B: Restore (When Update Fails)

Choosing “Restore” effectively wipes your iPad clean, replacing the entire operating system with a fresh, new copy downloaded from Apple. This is the definitive way to eliminate serious software corruption.

  1. In the Recovery Mode prompt, select Restore.
  2. Confirm that you want to erase all data and software.
  3. Allow the computer to download and install a fresh copy of iPadOS.
  4. Once complete, your iPad will reboot. It will be factory fresh, so you will need to set it up again.

If you backed up your iPad recently (to iCloud or your computer), you will be able to restore your apps, photos, and settings after the setup process is finished. If you are unsure if you backed up, look at the Apple support page on making backups for peace of mind later: How to back up your iPhone, iPad, and Apple Watch.

Step 4: DFU Mode – The Deepest Clean

Rarely, Recovery Mode isn’t enough because the corruption is too deep for the standard protocol to handle. In this very specific scenario, we turn to DFU Mode (Device Firmware Update). DFU Mode is a lower level of connection that bypasses the iPad’s bootloader entirely.

Crucial Note on DFU Mode: DFU Mode will always result in a full Restore (erasing all data). It is used only when Recovery Mode fails to fix the loop.

Entering DFU Mode

DFU Mode sequences are similar to Recovery Mode but require precise timing. You are essentially telling the iPad to wait for instructions from the computer before attempting to load any software.

DFU Mode Sequence (For iPads Without a Home Button):

  1. Connect the iPad to your computer.
  2. Press and hold the Top Button and Volume Down button for 10 seconds.
  3. While still holding the Volume Down button, release the Top Button.
  4. Continue holding the Volume Down button for another 5 to 10 seconds.
  5. If successful, the iPad screen will remain completely black—no Apple logo, no text.

DFU Mode Sequence (For iPads With a Home Button):

  1. Connect the iPad to your computer.
  2. Press and hold the Home Button and Top Button together for 10 seconds.
  3. While still holding the Home Button, release the Top Button.
  4. Continue holding the Home Button for another 5 to 10 seconds.
  5. If successful, the iPad screen will remain completely black.

Once your iPad is in DFU Mode (black screen, connected to computer), your computer software will detect it and prompt you to Restore the iPad. This forces the deepest level of software refresh possible.

Step 5: Investigating Non-Software Causes

If you have gone through Recovery Mode and DFU Mode, and the iPad still gets stuck in a boot loop, the chances are extremely high that the problem is physical hardware related. This means the internal components are failing to communicate correctly when instructed to start up the operating system.

Common Hardware Triggers

  • Battery Issues: An old or swollen battery might not supply enough consistent power to boot the device, causing it to crash mid-start.
  • Logic Board Damage: Physical drops can damage critical soldering points on the main logic board, leading to failure right at the point where the system tries to initialize.
  • Water Damage: Exposure to moisture can cause circuit corrosion that only manifests under the stress of a full system boot.

At this point, the friendly DIY fixes end, and professional assistance is necessary. Trying to open an iPad yourself is strongly discouraged, as the components are incredibly fragile and often require specialized tools and clean-room environments.

When to Contact Apple Support

If you have exhausted all software fixes (Steps 1 through 4), it is time to seek expert help. Make an appointment at an Apple Store or contact an Authorized Service Provider.

Before you go, it might feel overwhelming, but remember: you have already done the hard work by troubleshooting the software yourself! When you call or visit, clearly state: “My iPad is stuck in a boot loop, and I have already attempted Recovery Mode and DFU Mode Restore without success.” This saves time and gets you straight to hardware diagnosis.

You can start the preparation process via Apple’s official support channel here: Apple Support Contact Page.

Troubleshooting Summary Table: Which Fix to Try Next?

For easy reference, here is a quick guide based on where you are in the problem-solving process.

<td style

Categories Apple
Best Wifi Mesh for 1Gb Internet: Top Reliable Picks 2024
Macbook Air M2 Color Accuracy Explained

Leave a Comment

You must be logged in to post a comment.

Shoukhin Tech

ShoukhinTech is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

Navigation

  • Blog
  • About
  • Privacy Policy
  • Write for Us
© 2026 ShoukhinTech.com
Status Action to Take Expected Outcome
Apple logo appears, then disappears repeatedly. Perform Forced Restart (Step 1). Device boots normally, or returns to loop.
Forced Restart failed; device connects fine to computer. Enter Recovery Mode and try ‘Update’ (Step 3A). iPadOS is refreshed; device boots normally.
Recovery Mode ‘Update’ failed or gave an error. Enter Recovery Mode and select ‘Restore’ (Step 3B). Data is erased, but the OS is clean, allowing setup.
Device won’t even enter Recovery Mode correctly after multiple tries. Attempt DFU Mode (Step 4).