Site icon ShoukhinTech

How To Daisy Chain Routers?

How To Daisy Chain Routers

If your current router’s signal does not stretch throughout your entire house, or when you try to use the internet too far away from the router,

You might have already noticed that your connection becomes too weak to use the internet perfectly.

It can be a massive issue when you try to use the same router’s connection with too many devices.

To fix the issue with a simple technic is to use daisy chain two routers together. This method will widely help you to overcome the problem.

Here we’ve shown an amazing article about How To Daisy Chain Routers, a complete step-by-step guide, so stay on the page!

Daisy Chain Routers

Daisy chain routers are routers connected with too many routers in the same network, the only purpose of using the method is to increase the network range.

How To Daisy Chain Routers

The whole process is simple, but it requires some initial things like an Ethernet cable, two routers. That’s it. Without them, there is no need to use any additional types of equipment.

Well, We assumed that you have all the equipment and already use a router, now want to connect a new router to the same network you’re using with the help of a wired Ethernet cable.

Here we’ve shared 8 easy steps to complete the process.

Step #1: Ready Your Router:

Make sure that your first router should be the router you’re already using, and the second new router should the router you’ll use to extend your network.

Step #2: Connect Your Router:

Connect your second router to your computer, and log into the router’s control panel to set up the router with your network.

You can follow the user-manual to complete the setup or search for the router’s IP address to access the control panel.

Step #3: Make Some Changes:

In this 3 number step, you’ll need to make some changes to your second router’s configure page. For some reason, if you forget to make this change, you’ll probably have an issue.

Disable Dynamic Host Configuration Protocol (DHCP), and of course, ensure that you’ve done this before connecting two routers.

This requires to be disabled on the second router as the current router is the one that will allocate IP addresses to the devices on the network using DHCP.

Step #4: Login into The First Router:

Now you’ll need to log into your current router and find out the subnet and the range of IP that it allocate within DHCP.

Step #5: Assign The Second Router A Static IP :

Here in this step 5, you’ll need to go to the LAN setting option of your second router and make sure you have assigned the second router a static IP out of the range. But of course, within the first router’s subnet.

Don’t forget to recheck that you’re using the same network mask while doing the configuration.

An example can be given as an internal IP if router 1 uses We suggest using as the LAN IP for your router 2.

Step #6: Connect Router 2 to a LAN port on Router 1:

If everything goes well, you can think you’re ready to connect your router 2 to a LAN port on your router 1.

Once you plugged the network device into router 2, they will automatically pick up any setup via DHCP from router 1.

Step #7:WLAN SSID & Security Setting:

But you should look at the WLAN SSID setting. Just make sure your routers are using the same WLAN SSID as well as security settings.

Step #8:Check It if Works Or Not:

We assume that you have carefully followed the entire process of How To Daisy Chain Routers. Now it’s time to check the work.

To check that, go too far away from your house and check the range increased or not. If you think it’s increased compared to your one router set up, you will assume that it works well.

Useful Tips For Daisy Chain Routers:

For any reason, if you think you need to log into your router 2, all you need to do is go to a browser and type your router’s IP address, then you can manage the setting if needed.


That’s was the guide on How To Daisy Chain Routers. We hope you understand the guide well.

But make sure you’ve followed the step-by-step guide as we have shown in the article.

Exit mobile version